Boneham SP00008935 Slip-fixed Bushing 0.75 in Body Od

Product Description

The BONEHAM SP00008935 is a slip-fixed drill bushing designed for use in jig and fixture tooling applications. It features a body outside diameter of 0.75 inches, a length under head of 1.5 inches, and a head outside diameter of approximately 1.047 inches with a head height of 0.25 inches. The inside diameter is designated letter size K. This bushing is renewable, meaning it can be removed and replaced without disturbing the liner bushing pressed into the jig plate. It is typically installed by tool and die makers, machinists, and precision metalworking professionals working with drill jigs, fixture plates, and repetitive hole-location setups.

Slip-fixed bushings of this type are used in production drilling, reaming, and boring fixtures where a fixed guide is needed but the bushing must also be removable for maintenance or tooling changes. The SF industry code designates this as a slip-fixed style, which locks into a liner bushing via a locking mechanism rather than being pressed in permanently. This makes it well suited for applications requiring multiple operations on a single fixture or frequent bushing replacement due to wear.

Key Features

• Slip-fixed style with SF industry code designation for use with compatible liner bushings
• Renewable design allows removal and replacement without re-pressing or reworking the jig plate
• Body outside diameter of 0.75 inches with letter size K inside diameter
• Length under head of 1.5 inches for adequate guidance depth in standard jig plate applications
• Head outside diameter of approximately 1.047 inches with a 0.25 inch head height for positive seating against the jig surface

Compatibility

Designed as an OEM-style replacement or direct-fit component for drill jig and fixture assemblies requiring a slip-fixed renewable bushing with a 0.75 inch body outside diameter and SF industry code configuration.

Installation Notes

Installation is performed by tool and die makers or machinists during jig assembly or bushing replacement. The slip-fixed bushing is inserted into a compatible pressed liner bushing and locked in position using the appropriate locking mechanism for the fixture design. The jig plate assembly should be secured and the machine powered down before servicing bushings. Verify inside diameter designation and body OD against the fixture drawing before installation to confirm fit.