Boneham P265GE Press Fit Headless Drill Bushing Steel

Product Description

The BONEHAM P265GE is a headless press fit drill bushing designed to guide drill bits and other cutting tools with precision during machining operations. Manufactured from steel and conforming to Industry Code P, this bushing features a 13/64 inch inside diameter with a close inside diameter tolerance of +0.0001 to +0.0004 inches, a 13/32 inch body outside diameter, and an overall bushing length of 5/16 inch. The headless configuration allows flush or sub-flush seating in jig plates where a protruding head would interfere with workpiece clearance or fixture design. This part is installed by machinists, toolmakers, and jig-and-fixture builders in production and repair environments.

This bushing is suited for use in drill jigs, fixture plates, and tooling setups where consistent hole location and repeatable accuracy are required. The press fit installation method locks the bushing into a prepared bore in the jig body without the need for additional fasteners or set screws. Typical applications include production drilling, reaming, and light boring operations in metalworking, fabrication, and precision machining shops. The steel construction handles standard shop cutting fluids and the abrasion inherent to repetitive tooling contact.

Key Features

• Industry Code P headless design for flush seating in jig plates
• Inside diameter of 13/64 inch with tolerance of +0.0001 to +0.0004 inches for precise tool guidance
• 13/32 inch body outside diameter for firm press fit retention
• 5/16 inch overall bushing length suits shallow jig plate applications
• Steel construction for durability under repeated tooling contact and coolant exposure
• Non-renewable design intended for permanent or semi-permanent installation

Compatibility

Designed as an OEM-style replacement or new-installation drill bushing for drill jigs and fixture plates requiring an Industry Code P press fit headless bushing with a 13/64 inch inside diameter.

Installation Notes

Installation is performed by toolmakers or machinists using a press or arbor press to drive the bushing into a precision-reamed bore in the jig body. The receiving bore must be machined to the appropriate tolerance for a press fit to ensure the bushing seats fully and does not rotate or back out during use. Do not hammer the bushing in freehand, as this may damage the bushing bore or misalign the part. Verify the host jig plate is properly supported during pressing to avoid distortion.