Bmi 46455 Carbon Press Gas Tee 1-1/4 X 1-1/4 X 1/2 in

Product Description

The BMI 46455 is a carbon steel press-fit tee designed for natural gas and propane distribution piping. It connects a 1-1/4 inch run with a 1/2 inch branch outlet using a press-fit connection method, eliminating open-flame joining in gas piping systems. Sized at 1-1/4 x 1-1/4 x 1/2 inches, this fitting is used where a branch takeoff is required in a gas supply line. Licensed plumbers and pipefitters install this fitting as part of press-fit gas piping systems in both new construction and retrofit applications.

This tee is suited for residential and light commercial gas distribution systems where carbon steel press fittings are specified. It is used in branch configurations on main gas supply lines, typically in applications requiring a reduced-size outlet off a full-size run. The press-fit design is compatible with press tooling systems used in carbon steel gas piping installations.

Key Features

• Carbon steel construction rated for gas service applications
• Press-fit connection eliminates open-flame brazing or threading at the joint
• 1-1/4 x 1-1/4 x 1/2 inch configuration provides a reduced branch takeoff
• Designed for use in natural gas and propane piping systems
• Part of the BMI Carbon Press Gas Fitting series for consistent system compatibility

Compatibility

Designed as an OEM-style press-fit replacement or new-installation fitting for carbon steel gas piping systems requiring a 1-1/4 x 1-1/4 x 1/2 inch tee configuration.

Installation Notes

Installation must be performed by a licensed plumber or pipefitter in accordance with the International Fuel Gas Code (IFGC) and applicable local codes. Shut off and bleed the gas supply before making any connection, and verify zero pressure at the fitting location prior to pressing. Use only press tooling and jaws rated for carbon steel gas fittings to ensure a leak-free joint. After installation, pressure-test the system and leak-check all joints with an approved gas leak detection solution before returning the system to service.

Technical Specifications

• Material: Carbon Steel
• Connection Type: Press-Fit
• Run Size: 1-1/4 x 1-1/4 inches
• Branch Size: 1/2 inch
• Application: Gas (Natural Gas / Propane)
• Fitting Type: Tee
• UPC: 77770146455

Standard Information

• Brand: BMI
• Manufacturer Part Number: 46455