Belden Inc. CAF1309050 CAT6 Patch Cable Cmr White 50ft

Product Description

The BELDEN INC. CAF1309050 is a CAT6 patch cable terminated in the T568B wiring standard and rated CMR (Communications Multipurpose Cable, Riser) for in-wall and riser installations. At 50 feet in length, it is suited for structured cabling runs between network switches, patch panels, and end devices in commercial and light industrial environments. The open-boot connector design allows for easy handling and routing. Electricians and low-voltage cabling technicians are the primary installers of this cable type.

This patch cable is intended for horizontal and riser-rated network cabling applications in commercial buildings, data centers, and multi-floor installations. The CMR rating qualifies it for use in riser pathways between floors where fire-spread resistance is required. It is commonly pulled to connect structured cabling infrastructure to active networking equipment. The T568B termination is the predominant wiring standard in North American commercial installations and aligns with the majority of existing horizontal cabling plant deployments.

Key Features

• T568B termination standard for compatibility with North American commercial cabling infrastructure
• CMR (Riser) rating suitable for vertical runs between building floors
• 50-foot length accommodates longer runs from patch panel to equipment
• Open-boot connector design for straightforward installation and cable management
• CAT6 performance supports network applications up to 1 Gbps at 100 meters

Compatibility

Designed as an OEM-style patch cable for CAT6 and CAT6E structured cabling systems using T568B-wired patch panels, keystone jacks, and network switch ports.

Installation Notes

Installation is performed by licensed low-voltage technicians or electricians in accordance with ANSI/TIA-568 cabling standards and applicable local codes. Verify that the existing horizontal cabling plant is also terminated to the T568B standard before deployment to avoid wiring mismatches. Do not exceed the minimum bend radius of the cable during routing, and avoid running parallel to high-voltage conductors to prevent interference. Riser-rated cables must be installed in designated riser pathways as required by the applicable building and fire codes.