Belden Inc. 97510601000 Multimedia Cable 20 Pair Pvc

Product Description

The BELDEN INC. 97510601000 is a 20-pair PVC multimedia cable designed for low-voltage signal distribution in structured wiring and communications applications. Built with a PVC outer jacket and PVC insulation on each conductor pair, this cable is suited for installations where flexible routing and basic environmental protection are required. Licensed electricians, low-voltage technicians, and systems integrators typically specify this cable for data, audio, or control signal runs in commercial and residential environments. The 20-pair configuration allows multiple signal channels to be bundled in a single cable run, reducing conduit fill and simplifying termination at patch panels or terminal blocks.

This cable is appropriate for use in multimedia, structured wiring, and low-voltage control applications. It is commonly installed in commercial buildings, multi-unit residential projects, and light industrial settings where multiple signal pairs need to be routed through a single pathway. Typical applications include audio distribution panels, intercom systems, access control wiring, and general-purpose multi-conductor signal runs. The PVC jacket makes it suitable for indoor installation in conduit or cable tray environments that do not require plenum or riser ratings.

Key Features

• 20-pair conductor configuration supports multiple simultaneous signal channels in one cable
• PVC outer jacket provides basic protection against abrasion and moisture in indoor environments
• PVC conductor insulation on each pair for electrical isolation between signal channels
• Sold as a single unit (EA), allowing quantity-specific purchasing for project needs

Compatibility

Designed as an OEM-style multimedia cable for use in structured wiring, low-voltage control, and multi-pair signal distribution installations where a 20-pair PVC-jacketed cable is specified.

Installation Notes

Installation should be performed by a licensed electrician or certified low-voltage technician in accordance with applicable NEC requirements for the intended circuit classification. De-energize all circuits and verify with a meter before terminating conductors. Avoid sharp bends that exceed the cable minimum bend radius, and do not run alongside high-voltage conductors without proper separation as required by code. Confirm that PVC jacket and insulation ratings meet the requirements of the installation environment before pulling.