Belden Inc. 9451P 007U1000 Plenum Fep Cable 22 Awg

Product Description

The BELDEN INC. 9451P 007U1000 is a plenum-rated, foil-shielded twisted pair cable constructed with 22 AWG conductors and an FEP (fluorinated ethylene propylene) insulation jacket. FEP insulation meets plenum space requirements under NFPA 90A, making this cable suitable for air-handling spaces where standard PVC jacketed cables are not code-compliant. The violet outer jacket aids in visual identification during installation and future service. This cable is designed for low-voltage signal and control wiring applications and is handled by licensed electricians and low-voltage communications contractors.

This cable is used in commercial and institutional buildings where signal, control, or multimedia wiring must run through plenum-rated air-handling spaces such as above drop ceilings and within HVAC return air plenums. The 1000-foot unit reel suits large floor pulls and structured wiring installations in office, hospitality, and industrial facilities. The foil shield helps reduce electromagnetic interference along the cable run.

Key Features

• Plenum-rated FEP insulation meets NFPA 90A requirements for air-handling spaces
• 22 AWG conductor size suitable for low-voltage signal and control circuits
• Foil shield reduces electromagnetic and radio frequency interference
• Violet PVC outer jacket for easy visual identification and cable management
• 1000-foot reel format minimizes splices on long horizontal runs

Compatibility

Designed as a plenum-rated foil shielded twisted pair cable for low-voltage multimedia, signal, and control wiring applications in commercial and institutional structured cabling systems.

Installation Notes

Installation in plenum air-handling spaces must comply with local building codes and NFPA 90A requirements. De-energize all associated low-voltage circuits before terminating or splicing. Licensed electricians or registered low-voltage contractors should perform pulls in accordance with NEC Article 800 and applicable local amendments. Avoid sharp bend radii and do not exceed the cable minimum bend radius during pulls to protect the foil shield integrity.