Belden Inc. 82761 8771000 22 Awg Fep Plenum Cable

Product Description

The BELDEN INC. 82761 8771000 is a 1-pair, 22 AWG communication cable constructed with a fluorinated ethylene propylene (FEP) insulation and an overall foil shield (FS). Rated for plenum (FLRST) installation environments, this cable is built to meet the fire and smoke requirements demanded by air-handling spaces. Its natural jacket finish makes it suitable for above-ceiling and in-wall pathways where plenum-rated wiring is required by code. Low-voltage signal and data installers specify this cable for commercial and institutional projects where both performance and fire safety compliance are required.

This cable is intended for use in plenum-rated communication and control wiring applications in commercial buildings, offices, healthcare facilities, and institutional spaces. The foil shield provides protection against electromagnetic interference (EMI), making it appropriate for low-voltage signal runs in environments with moderate electrical noise. It is sold as a single unit (EA) and is well suited for structured wiring, intercom, and control circuit installations where a plenum-rated, shielded cable is specified by the project engineer or AHJ.

Key Features

• 1-pair, 22 AWG conductor configuration for low-voltage signal and control circuits
• FEP insulation rated for plenum (FLRST) air-handling spaces
• Overall foil shield (FS) for EMI and RFI interference rejection
• Natural jacket color for easy identification and compliance with project specifications
• Plenum rating meets fire and smoke propagation requirements for above-ceiling installation

Compatibility

Designed as an OEM-style plenum communication cable suitable for low-voltage signal, intercom, and control wiring applications in commercial and institutional environments where a 1-pair, 22 AWG FEP foil-shielded cable is specified.

Installation Notes

Installation should be performed by a licensed low-voltage or electrical contractor in accordance with applicable NEC requirements for plenum-rated cabling. De-energize all circuits in the pathway before pulling or terminating cable. Avoid sharp bends below the cable minimum bend radius and do not exceed rated pulling tension during installation. Verify that the plenum rating is acceptable to the authority having jurisdiction (AHJ) before rough-in.