Belden Inc. 3107A 0101000 2 Pair 22 Awg Shielded Cable

Product Description

The BELDEN INC. 3107A 0101000 is a 2-pair, 22 AWG multimedia cable constructed with a foamed high-density polyethylene (FHDPE) dielectric and an overall PVC jacket. The FHDPE insulation reduces capacitance and signal loss, making this cable well suited for low-voltage data, audio, and control signal transmission. The shielded construction helps reject electromagnetic interference, keeping signal integrity intact across the run. This type of cable is typically installed by low-voltage technicians, systems integrators, and electricians working on structured wiring, building automation, or AV distribution systems.

This cable is appropriate for commercial and residential multimedia wiring applications where reliable, shielded two-pair cabling is required. Typical installations include intercom wiring, security system signal runs, building automation control loops, and distributed audio or data lines. The PVC outer jacket suits in-wall and conduit routing in standard dry or damp indoor environments. It is sold and used as a single unit (EA), making it straightforward to order per length or segment as required by the job.

Key Features

• 2-pair, 22 AWG conductor configuration for low-voltage signal and control applications
• FHDPE dielectric reduces capacitance and improves high-frequency signal transmission
• Overall shielding provides protection against electromagnetic interference
• PVC outer jacket suitable for standard indoor in-wall and conduit installations
• Designed for multimedia, AV, automation, and low-voltage control wiring

Compatibility

Designed as a standard shielded 2-pair multimedia cable suitable for use in low-voltage signal, control, and audio distribution wiring systems where 22 AWG shielded cable is specified.

Installation Notes

Installation should be performed by a licensed low-voltage technician or electrician in accordance with applicable NEC requirements for the cable type and installation environment. Power down or de-energize any connected equipment before terminating conductors. Maintain the minimum bend radius during routing to avoid damaging the shield or dielectric. Do not route alongside high-voltage power conductors without adequate separation as required by code.