Belden Inc. 2413FS 0091000 Cat6 Plus Plenum Cable

Product Description

The BELDEN INC. 2413FS 0091000 is a Category 6 Plus (C6+) foil-shielded unshielded twisted pair (F/UTP) data cable rated for plenum (CMP) installations. This 4-pair cable ships on a 1000-foot pull-out reel in white jacket. The plenum rating means the cable meets the low-smoke, low-flame requirements of NFPA 262, making it compliant for installation in air-handling spaces and raised-floor plenum environments. Network installers and low-voltage electricians use this cable for structured cabling runs in commercial buildings where plenum-rated pathways are required by code.

This cable is suited for horizontal structured cabling runs in commercial and institutional buildings. Plenum-rated pathways, ceiling air-return spaces, and raised-access flooring are the primary installation environments. The F/UTP construction provides a foil shield around all four pairs, offering improved noise rejection compared to unshielded UTP, which is useful in electrically noisy environments such as data centers, open-plan offices, and industrial facilities. Licensed low-voltage contractors and network infrastructure technicians are the typical installers for this product type.

Key Features

• Category 6 Plus (C6+) performance rating for high-bandwidth structured cabling
• F/UTP construction with overall foil shield for improved EMI rejection over standard UTP
• CMP (plenum) jacket rating meets NFPA 262 low-smoke, low-flame requirements
• 4-pair configuration for standard Ethernet and voice cabling applications
• 1000-foot reel quantity minimizes mid-run splices on long horizontal runs
• White jacket for easy identification in multi-cable pathways

Compatibility

Designed as an OEM-style structured cabling solution for Cat6 Plus F/UTP plenum horizontal runs in commercial and institutional network infrastructure projects.

Installation Notes

Installation of plenum-rated data cable in air-handling spaces must comply with NEC Article 800 and local amendments governing communications wiring. Low-voltage or licensed network cabling contractors should follow TIA-568 bend radius and pull-tension guidelines to avoid degrading cable performance. Always power down active patch panels and switches before terminating cable ends. Do not exceed the manufacturer-specified maximum pulling tension during installation, and avoid sharp bends or kinks that can compromise pair geometry and signal performance.