Belden Inc. 1392P 010Z500 Multimedia Cable

Product Description

The BELDEN INC. 1392P 010Z500 is a composite multimedia cable combining a 2-conductor 22 AWG foil-shielded pair with a 2-conductor 18 AWG unshielded pair in a single black jacket. This construction allows one cable run to carry both low-level signal and power simultaneously, reducing conduit fill and simplifying pulls. It is designed for professional audio-visual, security, and building automation installations where signal and control wiring must be routed together. Licensed electricians and low-voltage systems integrators are the primary installers.

This cable is suited for commercial and residential AV distribution, access control, intercom, and building automation panel wiring. The composite design is common in applications where a shielded signal pair handles audio or data communication while the 18 AWG conductors carry power or control voltage. It is typically pulled through conduit or plenum pathways in commercial office, hospitality, healthcare, and institutional environments requiring clean, consolidated cable runs.

Key Features

• Composite construction: 2-conductor 22 AWG foil-shielded signal pair plus 2-conductor 18 AWG power or control pair in one jacket
• Black outer jacket for standard in-wall and in-conduit identification
• Shielded signal pair reduces electromagnetic interference on low-level signal circuits
• Single cable run replaces two separate cable pulls, reducing labor and conduit fill
• Sold as a single unit (EA) per manufacturer specification

Compatibility

Designed as an OEM-style composite multimedia cable suitable for professional low-voltage signal and power wiring applications where a combined 22 AWG shielded plus 18 AWG conductor cable is specified.

Installation Notes

Installation should be performed by a licensed low-voltage technician or electrician in accordance with applicable NEC requirements for the cable type and environment. De-energize all circuits before terminating conductors. Maintain proper bend radius during pulls to avoid damaging the foil shield on the signal pair, as kinking or over-bending can degrade shield continuity and signal performance. Verify local code requirements for plenum versus riser rating before installing in return-air spaces.