Belden Inc. 1392P 0101000 Multimedia Composite Cable

Product Description

The BELDEN INC. 1392P 0101000 is a multimedia composite cable combining a 2-conductor 22 AWG foil-shielded pair with a 2-conductor 18 AWG unshielded pair in a single black jacket. This construction allows signal and power to run together in one cable run, reducing conduit fill and labor time. It is sold as a single unit and suits low-voltage wiring applications where separate signal and power conductors must be routed together. Licensed electricians and low-voltage system installers are the primary trades that handle this cable.

This composite cable is used in commercial and residential multimedia, audio-visual, and control system installations where a combination of a shielded signal pair and a heavier power or speaker pair is needed in the same run. Typical applications include intercom systems, distributed audio, and control wiring where signal integrity on the 22 AWG shielded pair and current capacity on the 18 AWG pair are both required in a single pathway.

Key Features

• Composite construction combines 2-conductor 22 AWG foil-shielded pair with 2-conductor 18 AWG pair in one jacket
• Black outer jacket for standard low-voltage cable identification
• Foil shield on the 22 AWG pair provides signal isolation and noise rejection
• Single-cable run reduces labor and conduit fill compared to pulling separate cables
• Sold per unit as a discrete assembly from BELDEN INC.

Compatibility

Designed for use in multimedia, audio-visual, intercom, and low-voltage control wiring systems requiring a composite cable with both a shielded signal pair and an unshielded power or speaker pair in a common jacket.

Installation Notes

Installation should be performed by a licensed electrician or certified low-voltage systems technician in accordance with applicable NEC requirements for the cable type and installation environment. De-energize all circuits before terminating conductors and verify polarity on both pairs before finalizing connections. Do not exceed the cable bend radius during pulling, and keep low-voltage signal conductors separated from high-voltage wiring where required by code.