Belden Inc. 10GXM13 D151000 Cat6a Plenum Cable

Product Description

The BELDEN INC. 10GXM13 D151000 is a Category 6A plenum-rated data cable designed for high-performance horizontal runs in structured cabling systems. Built to meet Cat6A standards, this cable supports 10 Gigabit Ethernet applications and is rated for plenum air-handling spaces where low-smoke, flame-retardant jacket materials are required by code. With an overall diameter of 0.230 inches, it is engineered for high-density installations where conduit fill and pathway capacity are critical considerations. Network installers and low-voltage cabling contractors are the primary trades that specify and install this cable in commercial and institutional environments.

This plenum cable is suited for above-ceiling and air-handling plenum spaces in commercial office buildings, healthcare facilities, education campuses, and data centers. It supports structured cabling infrastructure deployments where 10GbE backbone or horizontal runs are required. The plenum jacket rating makes it compliant for use in return-air spaces without conduit in jurisdictions that follow NEC 800.113 and NFPA 90A guidelines for communications wiring.

Key Features

• Category 6A performance supporting 10 Gigabit Ethernet transmission
• Plenum-rated jacket suitable for air-handling spaces per NEC requirements
• 0.230 inch overall diameter allows efficient conduit fill in high-density pathways
• Sold per individual unit (each) as specified in product packaging
• Designed for horizontal structured cabling runs in commercial applications

Compatibility

Designed as an OEM-style replacement and standard-fit solution for Category 6A plenum structured cabling installations requiring 10GbE-rated horizontal cable in air-handling plenum spaces.

Installation Notes

Installation should be performed by a licensed low-voltage cabling contractor or qualified network infrastructure technician familiar with TIA-568 structured cabling standards and NEC Article 800. De-energize all active network equipment and verify pathway clearances before pulling cable through plenum spaces. Maintain minimum bend radius throughout the run to preserve pair geometry and signal integrity. Do not exceed manufacturer pulling tension recommendations or kink the cable jacket during installation.