Belden FP3SDMF003M OM3 MPO12 Fiber Patch Cable 3M

Product Description

The Belden FP3SDMF003M is a multimode fiber optic patch cable built to OM3 performance specifications with MPO12 female connectors on each end. Designed for high-density structured cabling environments, it supports parallel optical interconnects in data centers, telecom rooms, and enterprise network infrastructure. The 3-meter length suits rack-to-rack and panel-to-switch runs where cable management and low signal loss are priorities. Licensed network technicians and low-voltage cabling contractors are the typical installers. The MPO12 interface supports 12-fiber ribbon-style connectivity, making this cable well suited for high-bandwidth parallel transmission systems running 40G or 100G applications.

This patch cable is designed for use in structured fiber cabling systems that rely on MPO-based trunk and breakout configurations. Typical installations include data center interconnect panels, fiber distribution units, and modular cassette systems. The OM3 multimode fiber grade supports laser-optimized 850 nm transmission and is commonly paired with VCSEL-based transceivers. The 3-meter reach is practical for in-rack and short inter-rack runs in standard data center cabinet layouts.

Key Features

• OM3 multimode fiber construction supports laser-optimized 850 nm transmission
• MPO12 female connectors on both ends for high-density panel and cassette connections
• 3-meter cable length designed for in-rack and short inter-rack structured cabling runs
• 12-fiber MPO interface enables parallel optical transmission for 40G and 100G applications
• Sold as a single unit, ready for immediate deployment in fiber distribution systems

Compatibility

Designed as an OEM-style replacement and standard interconnect patch cable for OM3 multimode MPO12 fiber distribution systems in data center and enterprise structured cabling environments.

Installation Notes

Installation should be performed by a licensed low-voltage cabling contractor or network technician familiar with fiber optic handling practices. Deactivate or power down connected optical transceivers before mating or disconnecting MPO connectors to avoid eye safety hazards from active laser sources. Use a fiber end-face inspection scope to verify connector cleanliness before insertion, as contamination is the leading cause of insertion loss in MPO assemblies. Follow TIA-568 or applicable structured cabling standards for bend radius, cable routing, and labeling.