Bando 8v1600 Wedge V-belt 160 in 1 in Top Width

Product Description

The BANDO 8v1600 is a wedge V-belt designed for high-load power transmission applications in industrial and commercial equipment. Part of the BANDO Power Ace series, this belt measures 160 inches in outside length and 1 inch in top width, with a thickness of approximately 0.87 inches (22 mm). It features a single-rib wedge profile, which allows higher power capacity in a more compact cross-section compared to classical V-belt designs. HVAC mechanics, industrial maintenance technicians, and millwrights install this type of belt on blowers, compressors, fans, and drive systems that require reliable, slip-resistant power transmission.

The 8v1600 is suited for heavy-duty belt drive systems found in commercial HVAC equipment, industrial air handlers, compressors, and pump drives. The 8V cross-section is a standard wedge profile used where space constraints or higher torque demands make classical belts impractical. This belt is appropriate for both new installations and replacement service on equipment designed for the 8V belt profile at a 160-inch outside circumference.

Key Features

• Wedge V-belt profile for higher power density versus classical V-belt cross-sections
• 160-inch outside length suits large-diameter or long-center-distance drive systems
• 1-inch top width with standard 8V cross-section geometry
• 22 mm (approximately 0.87 inches) belt thickness
• Single-rib construction for straightforward single-groove sheave applications
• Power Ace series designation indicates industrial-grade construction

Compatibility

Designed as a replacement for drive systems requiring an 8V-profile wedge V-belt with a 160-inch outside length. Verify sheave groove angle and belt cross-section match before installation.

Installation Notes

Belt installation should be performed by a qualified mechanic or technician. Always de-energize and lock out the drive system before removing or installing belts. Never pry a belt over a sheave flange; reduce center distance to allow proper seating, then re-tension to the drive manufacturer's specification. Inspect sheave grooves for wear before installing a new belt.