Bando 240L050G Timing Belt 0.5 in 64 Teeth Neoprene Series L

Product Description

The BANDO 240L050G is a Series L synchronous timing belt designed for precise power transmission in industrial and mechanical drive systems. Built from neoprene with a fiberglass cord, this belt delivers reliable torque transfer and dimensional stability under load. It measures 24.0 inches in pitch length with a 0.375-inch pitch, 64 trapezoidal teeth, and a 0.5-inch working width. The neoprene construction resists oil, heat, and moderate chemical exposure, making it suited for demanding drive environments. Mechanical technicians and equipment service professionals install this belt on fixed-center and adjustable-center drive systems requiring precise indexing or timing.

The 240L050G fits applications that call for a standard Series L (0.375-inch pitch) timing belt in a 0.5-inch width. Typical uses include conveyor drives, HVAC blower assemblies, light industrial machinery, pump drives, and OEM equipment requiring synchronous belt power transmission. The trapezoidal tooth profile engages standard Series L sprockets and pulleys. It operates across a temperature range of -22 degrees F to 194 degrees F, covering most indoor mechanical and light-duty industrial environments.

Key Features

• Series L trapezoidal tooth profile for synchronous, no-slip power transmission
• Neoprene construction resists oil, heat, and moderate chemical exposure
• Fiberglass cord provides high tensile strength and low stretch under load
• 64 teeth across a 24.0-inch pitch length for precise drive indexing
• Operating range of -22 degrees F to 194 degrees F suits most indoor drive applications
• 0.5-inch width fits standard Series L sprockets without modification

Compatibility

Designed as a direct replacement for belt number 240L050 in any drive system specifying a Series L timing belt with a 0.5-inch width and 64 teeth. Fits standard Series L sprockets and pulleys with a 0.375-inch pitch groove profile.

Installation Notes

Power down and lock out the drive system before removing or installing the belt. Verify sprocket alignment and center distance before tensioning the replacement belt. Use a belt tension gauge appropriate for Series L timing belts to set proper tension — do not over-tension, as this accelerates bearing and belt wear. This installation is typically performed by a qualified mechanical or HVAC technician.