Baldwin Filters PA3460 Air Filter Element Dust Collector

Product Description

The BALDWIN FILTERS PA3460 is a round air filter element designed for dust collector applications in industrial and commercial work environments. With an outside diameter of 7.938 inches and an overall length of 16.5 inches, this element fits into dust collector housings where maintaining clean breathing air is a core requirement. It ships with both an A gasket and an F gasket included, supporting a proper seal at installation. At 4.85 pounds, the element is a direct-style replacement intended to keep filtration performance at OEM levels. HVAC and industrial maintenance technicians working on dust collection equipment are the primary installers for this part.

The PA3460 is suited for industrial dust collector units operating in manufacturing, fabrication, woodworking, and other environments where airborne particulate control is required. This element is a direct replacement for the Torit 8PP18803-00 filter, making it a verified cross-reference for facilities running compatible Torit dust collector equipment. Both the included A gasket and F gasket allow the installer to match the correct sealing configuration for the housing in use.

Key Features

• Round element design with 7.938 inch outside diameter for precise housing fit
• 16.5 inch overall length suits standard dust collector filter housings
• Includes A gasket and F gasket for correct sealing at installation
• OEM-equivalent filtration performance supports clean air in work environments
• Direct replacement cross-reference for Torit 8PP18803-00

Compatibility

The PA3460 is a direct replacement for the Torit 8PP18803-00 filter element. It is designed for use in dust collector systems requiring a round air filter element with a 7.938 inch outside diameter and 16.5 inch overall length.

Installation Notes

Installation is typically performed by industrial maintenance technicians or HVAC service professionals. Before servicing the dust collector, power down the unit and follow lockout/tagout procedures per OSHA and local safety requirements. Inspect the housing seating surface for debris before installing the new element, and confirm the correct gasket configuration using the included A or F gasket. Do not operate the collector with a damaged or improperly seated gasket.