B38;K Llc 103-003 Brass Hose Bibb 1/2 Inch Solder

Product Description

The B38;K LLC 103-003 is a standard threaded brass hose bibb designed for residential and light commercial outdoor water supply applications. It features a 1/2 inch external male pipe thread inlet, a 1/2 inch internal solder connection, and a 3/4 inch hose thread outlet. The all-brass construction provides corrosion resistance suited to potable water service. Pipe threads conform to ANSI B1.20.1 and hose threads conform to ANSI B1.20.7, ensuring compatibility with standard fittings and garden hose connections. Licensed plumbers and general contractors install this fitting during new construction, renovation, or repair work on residential water distribution systems.

This hose bibb is used in exterior wall applications where a threaded or soldered supply line must terminate at a hose connection point. It is appropriate for residential potable water systems served by copper tubing, where the supply side is joined via solder and the outlet side accepts a standard 3/4 inch garden hose fitting. The compact profile fits into standard rough-in conditions without modification.

Key Features

• Brass body construction for corrosion resistance in potable water service
• 1/2 inch internal solder connection for copper tubing supply lines
• 1/2 inch external male pipe threads on the inlet side per ANSI B1.20.1
• 3/4 inch hose thread outlet per ANSI B1.20.7 for standard garden hose compatibility
• Compact dimensions: approximately 3.63 inches length by 2.69 inches height by 1 inch width

Compatibility

Designed as an OEM-style replacement or new-installation hose bibb for residential and light commercial copper plumbing systems using 1/2 inch supply lines.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC requirements. Shut off the water supply and depressurize the line before soldering or making threaded connections. Use appropriate flux and solder rated for potable water when making the solder joint, and apply thread sealant tape to all threaded connections. Do not over-torque threaded fittings on brass bodies.