Au-ve-co Products 16818 Plastic Panel Rivet Ratchet Shank

Product Description

The AU-VE-CO PRODUCTS 16818 is a plastic panel rivet with a ratchet shank, designed for securing panels, trim, and lightweight components in place. The ratchet shank design allows the fastener to lock into position upon installation without requiring tools on the backside, making single-sided access installations straightforward. The rivet accepts a maximum hole diameter of 7.9mm and features a 0.75 inch head diameter that sits flush against the panel surface. With a 7/8 inch length under the head, it accommodates material thickness up to 7.2mm. This fastener is installed by HVAC, automotive, marine, and general trade technicians wherever panel retention with clean aesthetics is required.

This rivet is suited for light-duty panel fastening applications in residential and commercial environments. Common uses include securing HVAC cabinet panels, equipment enclosure covers, ductwork access panels, and similar trim or fascia assemblies. The black color blends with most dark panel surfaces. Its plastic construction makes it resistant to corrosion, which is an advantage in humid or wet mechanical spaces. Technicians working with snap-in panel assemblies frequently use this style of fastener as a quick and reliable retention solution where threaded fasteners are impractical.

Key Features

• Ratchet shank design locks in place without rear access or secondary hardware
• Maximum hole diameter of 7.9mm for standard panel punch sizes
• 0.75 inch head diameter provides a clean, low-profile face
• 7/8 inch length under head accommodates up to 7.2mm material thickness
• Plastic construction resists corrosion in humid environments
• Black color finish blends with dark panel surfaces

Compatibility

Designed as an OEM-style replacement panel rivet for applications requiring a ratchet shank fastener in a 7.9mm diameter hole with up to 7.2mm material thickness.

Installation Notes

This fastener is installed by hand or with a standard push tool by aligning the shank with the panel hole and pressing firmly until the ratchet tabs engage. No power tools are required. Before servicing any panel assembly, power down or de-energize the equipment per applicable safety codes. Avoid over-driving the rivet, as excessive force can fracture the plastic shank and prevent proper retention.