Atlasied DAT35ST70 70V Stereo Attenuator Volume Control

Product Description

The ATLASIED DAT35ST70 is a 70-volt stereo attenuator designed for distributed audio systems in commercial and light commercial installations. It allows local volume adjustment at the listening zone without affecting the overall amplifier output level. The 70V constant-voltage topology is the standard for multi-zone paging and background music systems, making this control a practical solution for conference rooms, retail spaces, restaurants, and similar environments. The Decora-style form factor fits standard single-gang wall plates, keeping installations clean and code-compliant. Low-voltage audio technicians and systems integrators are the primary trades that handle installation and commissioning of this device.

The DAT35ST70 is suited for 70-volt distributed audio applications where individual room or zone volume control is required. It mounts in a standard single-gang electrical box using a Decora-style faceplate, integrating cleanly with existing wall device layouts. Typical install scenarios include background music zoning in commercial spaces, paging system attenuation at remote speaker locations, and multi-zone audio distribution in hospitality or institutional settings. The stereo configuration supports two-channel audio paths within the same 70V system architecture.

Key Features

• 70-volt constant-voltage circuit compatibility for multi-zone distributed audio systems
• Stereo attenuator handles two independent audio channels in a single unit
• Decora-style faceplate integrates with standard single-gang wall plate openings
• Local zone volume control without altering amplifier drive level
• Sold as a single unit for straightforward quantity ordering

Compatibility

Designed as an OEM-style replacement or new-installation component for 70-volt stereo distributed audio systems requiring local attenuator volume control at the zone level.

Installation Notes

Installation is typically performed by a licensed low-voltage audio or systems integration technician. Power down or mute the amplifier driving the 70V line before making any wiring connections at the attenuator. Mount in a standard single-gang electrical box and follow local low-voltage wiring codes; in commercial installations, NEC Article 725 Class 2 or Class 3 wiring requirements commonly apply. Do not connect this device directly to a standard line-voltage circuit.