Atkore 877008 Emt 90-degree Elbow 1/2 Inch Conduit Bend

Product Description

The ATKORE 877008 is a 1/2 inch, 90-degree elbow fitting for Electrical Metallic Tubing (EMT) conduit systems. Manufactured from galvanized steel, it provides a durable, corrosion-resistant directional change in EMT raceway runs. Electricians use this fitting to route conduit around corners, obstacles, and structural elements in both new construction and retrofit wiring work. The galvanized finish meets standard indoor and dry-location requirements, and the 90-degree bend angle is the most common configuration for panel feeds, branch circuit runs, and equipment drops in commercial and residential electrical installations.

This elbow is suited for use in light commercial and residential electrical systems wherever a 90-degree direction change is required in a 1/2 inch EMT conduit run. Typical applications include panel and subpanel rough-in, device and fixture feeds, and conduit drops to junction boxes. It is installed by licensed electricians following NEC requirements for conduit raceway systems.

Key Features

• 90-degree bend angle for standard right-angle conduit routing
• Sized for 1/2 inch EMT conduit, the most commonly used trade size in commercial and residential wiring
• Galvanized steel construction provides corrosion resistance in dry and standard indoor environments
• Designed to accept standard EMT set-screw or compression couplings at each end
• Complies with EMT conduit fitting classifications per NEC raceway standards

Compatibility

Designed as an OEM-style replacement and standard fitting for 1/2 inch EMT conduit raceway systems in residential and commercial electrical installations.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits in the affected raceway before beginning work. Secure the elbow to conduit using compatible 1/2 inch EMT couplings or connectors and ensure all connections are fully tightened to maintain raceway continuity and grounding integrity. Do not use this fitting with conduit types other than 1/2 inch EMT.

Technical Specifications

• Conduit Type: EMT (Electrical Metallic Tubing)
• Trade Size: 1/2 inch
• Bend Angle: 90 degrees
• Material: Galvanized Steel
• Sub-Category: EMT Conduit Bend
• UNSPSC: 39121464
• UPC: 091111020216

Standard Information

• Brand: ATKORE
• Manufacturer Part Number: 877008