Atkore 200g2ingalvconduit 2 in Galvanized Rigid Conduit 10 Ft

Product Description

The ATKORE 200g2ingalvconduit is a 2-inch trade size galvanized steel rigid metal conduit (RMC) section designed for protecting electrical conductors in commercial, industrial, and heavy-duty residential installations. Each length measures 10 feet with a wall thickness of 0.146 inches and an outer diameter of 2.375 inches. The hot-dip galvanized finish provides corrosion resistance for both indoor and outdoor applications. Licensed electricians install rigid conduit as a raceway system where maximum mechanical protection of wiring is required.

This conduit is suited for use in exposed or concealed installations including wet locations, direct burial where permitted by local code, and areas subject to physical damage. Common applications include service entrance runs, equipment feeder installations, industrial plant wiring, and exterior routing along building facades. The 10-foot stick length is the industry-standard section for threading and coupling on the job site.

Key Features

• Galvanized steel finish for corrosion resistance in wet and outdoor environments
• 2-inch trade size with 2.375-inch outer diameter and 0.146-inch wall thickness
• 10-foot standard section length compatible with threaded couplings and fittings
• Rigid metal construction provides maximum mechanical protection for enclosed conductors
• Suitable for use in locations requiring RMC per NEC Article 344

Compatibility

Designed as a standard 2-inch trade size rigid metal conduit section compatible with threaded RMC fittings, couplings, and conduit bodies conforming to the same trade size.

Installation Notes

Rigid metal conduit must be installed by a licensed electrician in accordance with NEC Article 344 and applicable local electrical codes. De-energize all circuits in the work area before pulling conductors. Field cutting requires reaming and threading to restore the full thread profile and remove burrs that could damage conductor insulation. Support spacing and grounding continuity requirements are governed by the NEC and local amendments.

Technical Specifications

• Trade Size: 2 inches
• Outer Diameter: 2.375 inches
• Wall Thickness: 0.146 inches
• Length: 10 feet
• Material: Steel
• Finish: Galvanized
• Weight: 35 pounds per section (350 pounds per 100 feet)

Standard Information

• Brand: ATKORE
• Manufacturer Part Number: 200g2ingalvconduit