Atkore 012g1/2ingalvconduit 1/2 in Galvanized Rigid Conduit 10 Ft

Product Description

The ATKORE 012g1/2ingalvconduit is a 1/2-inch trade-size galvanized steel rigid metal conduit (RMC) designed for electrical wiring protection in demanding commercial, industrial, and residential applications. The conduit measures 10 feet in length with an outer diameter of 0.84 inches and a wall thickness of 0.104 inches. The hot-dip galvanized finish provides corrosion resistance for both indoor and outdoor installations. Licensed electricians and electrical contractors install this conduit as a protective raceway for electrical conductors in exposed, embedded, or direct-burial applications where mechanical protection and code compliance are required.

This rigid conduit is suited for new construction and retrofit electrical projects across commercial, industrial, and residential job sites. It works in wet, dry, and hazardous locations where a high-strength metal raceway is needed to protect conductors from physical damage. The 10-foot stick length is a standard field dimension, compatible with standard RMC fittings, couplings, and threaded connectors used in typical conduit runs.

Key Features

• 1/2-inch trade size with 0.84-inch outer diameter for standard RMC fitting compatibility
• 0.104-inch wall thickness provides rigid mechanical protection for enclosed conductors
• Galvanized steel finish resists corrosion in wet, damp, and outdoor environments
• 10-foot length is a standard stick size for efficient layout and reduced coupling count
• Threaded-end compatible with standard RMC couplings, connectors, and locknuts

Compatibility

Designed as a standard 1/2-inch trade-size rigid metal conduit for use with RMC-rated fittings, couplings, and conduit bodies conforming to standard RMC dimensions.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) Article 344 and applicable local codes. De-energize all circuits in the work area before beginning conduit runs or pulling conductors. Use a pipe reamer to deburr cut ends before threading or inserting conductors to prevent insulation damage. Support spacing, fill calculations, and bonding must comply with NEC requirements for rigid metal conduit.

Technical Specifications

• Material: Steel
• Finish: Galvanized
• Trade Size: 1/2 inch
• Outer Diameter: 0.84 inches
• Wall Thickness: 0.104 inches
• Length: 10 feet
• Weight: 82 pounds per 100 feet

Standard Information

• Brand: ATKORE
• Manufacturer Part Number: 012g1/2ingalvconduit