Atco 129CT0075 Bell Van Hanger 3/4 in Pipe Carbon Steel

Product Description

The ATCO RUBBER PRODUCTS 129CT0075 is a bell-style van hanger designed to support 3/4 inch copper tube in piping systems. Manufactured from carbon steel with a copper epoxy (Copper-Gard) coating, this hanger provides corrosion resistance in environments where copper tubing is installed. The bell profile cradles the tube securely, reducing vibration transfer and maintaining proper pipe alignment. With a width of 2.375 inches and a fit for 7/8 inch outside diameter copper tube, this hanger suits standard residential and light commercial plumbing and mechanical installations. Licensed plumbers and mechanical contractors are the primary installers.

This hanger is used in residential and commercial plumbing, HVAC, and mechanical piping systems where 3/4 inch copper tube must be suspended from structural members such as joists, beams, or unistrut. The Copper-Gard epoxy coating helps prevent galvanic corrosion between the steel hanger and the copper tube, making it appropriate for installations where dissimilar metal contact is a concern. It fits the FIG 129CT series and is sized for 7/8 inch OD copper tube.

Key Features

• Bell-style profile for secure copper tube support and vibration dampening
• Carbon steel construction for structural strength
• Copper epoxy (Copper-Gard) coating reduces galvanic corrosion risk at steel-to-copper contact points
• Sized for 7/8 inch OD copper tube, corresponding to 3/4 inch nominal pipe size
• 2.375 inch width suits standard joist and beam spacing installations
• Part of the FIG 129CT series for consistent fitment across a system

Compatibility

Designed for use with 7/8 inch OD copper tube, corresponding to 3/4 inch nominal pipe or tube size, as part of the FIG 129CT hanger series.

Installation Notes

Installation is typically performed by licensed plumbers or mechanical contractors. Shut off all fluid flow and relieve system pressure before removing or repositioning existing hangers. Hanger spacing should conform to applicable codes such as the International Plumbing Code (IPC) for the pipe material and size being supported. Do not overtighten fasteners through the hanger rod hole, as deforming the bell profile can affect tube alignment and support.

Technical Specifications

• Series: FIG 129CT
• Type: Bell Van Hanger
• Pipe/Tube Size: 3/4 inches
• Outside Diameter (Tube): 7/8 inches
• Width: 2.375 inches
• Material: Carbon Steel
• Finish: Copper Epoxy Coated (Copper-Gard)
• Suitable For Use With: 7/8 inch OD Copper Tube

Standard Information

• Brand: ATCO RUBBER PRODUCTS
• Manufacturer Part Number: 129CT0075