Atco 010-R8_10X5FT R8 Pipe Insulation Sleeve 10 in 5 Ft

Product Description

The ATCO RUBBER PRODUCTS 010-R8_10X5FT is an R8-rated fiberglass pipe insulation sleeve designed for indoor HVAC applications. It features a thick fiberglass insulation blanket core wrapped in a reinforced metalized polyester vapor barrier jacket. The flat, blanket-style construction ships in 5-foot sections, which eliminates field cutting and reduces installation time compared to duct wrap. Rated for temperatures from -20 degrees F to 250 degrees F, this sleeve meets UL 181B standards and is suitable for use on 10-inch pipe in commercial and residential HVAC systems. A starter cap is included to complete the installation.

This insulation sleeve is intended for indoor HVAC system piping, specifically 10-inch pipe runs where thermal efficiency and vapor control are required. The 5-foot flat sections are sized to minimize jobsite and in-shop cutting, making them practical for mechanical contractors and HVAC technicians working on duct and pipe systems in new construction or retrofit applications. The reinforced vapor barrier jacket helps control condensation on cold surfaces and reduces heat gain or loss along the pipe run.

Key Features

• R8 thermal resistance rating for effective energy retention in HVAC pipe systems
• Fiberglass insulation blanket core provides durable, long-term thermal performance
• Reinforced metalized polyester vapor barrier jacket controls moisture and condensation
• 5-foot sections reduce field cutting and lower labor costs versus duct wrap installation
• Starter cap included for complete, ready-to-install packaging
• UL 181B listed for indoor HVAC system applications

Compatibility

Designed for use on 10-inch indoor HVAC pipes meeting UL 181B application requirements. Suitable as an OEM-style insulation sleeve for residential and commercial mechanical systems requiring R8 thermal and vapor control on round pipe.

Installation Notes

Installation should be performed by a licensed HVAC technician or mechanical contractor in accordance with local mechanical codes and UL 181B application guidelines. Power down the HVAC system and allow surfaces to reach ambient temperature before applying insulation. Ensure the pipe surface is clean and dry prior to wrapping to achieve proper vapor barrier adhesion. Do not compress the fiberglass core, as compression reduces the effective R-value of the sleeve.

Technical Specifications

• Pipe Size: 10 inches
• Section Length: 5 feet
• Thermal Resistance: R8
• Maximum Temperature Rating: 250 degrees F
• Minimum Temperature Rating: -20 degrees F
• Insulation Material: Fiberglass Blanket
• Jacket Material: Reinforced Metalized Polyester
• Type: Flat Blanket Sleeve
• Application: Indoor HVAC System
• Inclusions: Starter Cap
• Applicable Standard: UL 181B

Standard Information

• Brand: ATCO RUBBER PRODUCTS
• Manufacturer Part Number: 010-R8_10X5FT