Atco 010-R4.2_14X5FT Pipe Insulation Sleeve R4.2 14 Inch 5 Foot

Product Description

The ATCO RUBBER PRODUCTS 010-R4.2_14X5FT is a flat-style fiberglass pipe insulation sleeve designed for indoor HVAC system applications. It combines a thick fiberglass insulation blanket core with a reinforced metalized polyester vapor barrier jacket, delivering an R-4.2 thermal resistance value. Each section measures 14 inches in diameter by 5 feet in length, eliminating the need for cutting on the bench or jobsite. The pre-sized format reduces labor time compared to field-cut duct wrap methods. Rated for temperatures from -20 degrees F to 250 degrees F, this sleeve handles the full range of conditions found in residential and light commercial HVAC piping runs. A starter cap is included.

This insulation sleeve is suited for indoor HVAC piping installations where thermal efficiency and vapor control are required. The 5-foot section length is sized to fit standard pipe runs without additional field trimming, making it a practical choice for HVAC technicians working on supply or return piping in mechanical rooms, attic spaces, and utility chases. The reinforced vapor barrier jacket reduces condensation risk on cold-side piping and limits heat gain on hot-side lines. It is installed by trade professionals including licensed HVAC mechanics and sheet metal contractors on new construction and retrofit projects.

Key Features

• R-4.2 thermal resistance rating for effective pipe insulation
• Fiberglass insulation blanket core with reinforced metalized polyester vapor barrier jacket
• Pre-cut 5-foot sections eliminate jobsite and in-shop cutting
• Flat, blanket-style construction for straightforward wrapping and installation
• Rated from -20 degrees F to 250 degrees F for broad HVAC application coverage
• Starter cap included for complete sleeve termination

Compatibility

Designed for use on 14-inch indoor HVAC piping. Meets UL 181B applicable standard. Suitable for residential and commercial HVAC system piping installations where blanket-style pipe insulation sleeves are specified.

Installation Notes

Installation is typically performed by a licensed HVAC technician or sheet metal contractor. Shut down the associated HVAC system and allow all piping to reach ambient temperature before applying insulation. Ensure the pipe surface is clean and dry prior to fitting the sleeve. Secure seams and terminations per the manufacturer guidelines and applicable local mechanical codes.

Technical Specifications

• R-Value: R-4.2
• Pipe Size: 14 inches
• Section Length: 5 feet
• Type: Flat Blanket Sleeve
• Insulation Material: Fiberglass
• Jacket Material: Reinforced Metalized Polyester
• Maximum Temperature Rating: 250 degrees F
• Minimum Temperature Rating: -20 degrees F
• Application: Indoor HVAC System
• Applicable Standard: UL 181B
• Inclusions: Starter Cap

Standard Information

• Brand: ATCO RUBBER PRODUCTS
• Manufacturer Part Number: 010-R4.2_14X5FT