Associated Spring Raymond 204-932 Die Spring 8 in Medium Duty

Product Description

The ASSOCIATED SPRING RAYMOND 204-932 is a medium-duty die spring designed for use in stamping dies, press tooling, and other industrial spring applications. Built from chromium alloy steel with a trapezoidal wire shape, this spring delivers consistent force and long cycle life under repeated compression loads. It has a free length of 8 inches (203 mm), a rod diameter of 38 mm, and a hole diameter of 63 mm. The blue color designation identifies it as a medium-duty load rating per ISO 10243. Licensed HVAC, plumbing, and industrial professionals specify this spring for tooling maintenance and die set rebuilds.

This spring is suited for industrial tooling environments where predictable deflection and load characteristics are required. The 204-932 is rated to a maximum deflection load of 1,708.55 pounds (7,600 N) with a maximum deflection and travel to solid load of 76 mm. It is commonly installed in punch press dies, injection mold assemblies, and metal fabrication tooling where a medium-duty coil spring is specified. The trapezoidal wire cross-section maximizes material volume per coil, which increases load capacity compared to round wire springs of similar envelope dimensions.

Key Features

• Medium-duty load rating per ISO 10243 - blue color code for quick visual identification
• Chromium alloy steel construction for high fatigue resistance under repeated cycling
• Trapezoidal wire shape maximizes load capacity within a compact spring envelope
• 8-inch (203 mm) free length with 76 mm maximum deflection and travel to solid
• Maximum deflection load of 1,708.55 pounds (7,600 N)
• Conforms to ISO 10243 dimensional and load standards

Compatibility

Designed as an OEM-style replacement or direct-fit die spring for industrial press tooling and stamping die sets requiring a medium-duty spring with a 63 mm hole diameter and 38 mm rod diameter per ISO 10243 specifications.

Installation Notes

Die springs of this type are installed and replaced by toolmakers, press maintenance technicians, or millwrights during die set maintenance. Before replacing a spring, de-energize and lock out the press per applicable machine safety procedures. Ensure the rod and hole diameters of the die set match the spring dimensions before installation. Inspect the spring seat surfaces for wear or damage that could cause uneven loading or premature failure.