Associated Spring Raymond 204-914 Die Spring 3.5 in

Product Description

The ASSOCIATED SPRING RAYMOND 204-914 is a medium-duty die spring designed for use in stamping dies, punch presses, and precision tooling applications. It features a trapezoidal wire cross-section that maximizes the load-bearing area and provides consistent force output over repeated compression cycles. The spring has a free length of 3.5 inches (89 mm), a rod diameter of 38 mm, and a hole diameter of 63 mm. Constructed from chromium alloy steel, it delivers reliable performance under the cyclical loads typical of production tooling environments. The blue color coding identifies it as a medium-duty rating per ISO 10243.

This die spring is suited for industrial tooling installations including stamping, forming, and die-casting fixtures in both production and job-shop environments. It is sized to fit standard die sets and is appropriate for applications where a maximum deflection load of 1928.86 pounds (8580 N) and a travel-to-solid distance of 33 mm are within the required operating parameters. Toolmakers, die setters, and maintenance technicians typically specify and install this part during die builds or spring replacement service.

Key Features

• Medium-duty rating with blue color coding per ISO 10243 standard
• Trapezoidal wire shape maximizes coil fill and load capacity within the die space
• 3.5-inch (89 mm) free length with 33 mm maximum deflection travel to solid
• Maximum deflection load of 1928.86 pounds (8580 N)
• Chromium alloy steel construction for durability under cyclic compressive loads
• Rod diameter of 38 mm and hole diameter of 63 mm for standard die set fitment

Compatibility

Designed as an OEM-style replacement or new-build component for standard medium-duty die spring applications conforming to ISO 10243 specifications with a 63 mm hole diameter and 38 mm rod diameter.

Installation Notes

Die springs are installed and replaced by toolmakers or maintenance personnel during die maintenance or new die construction. Always de-energize and lock out the press before accessing the die set. Ensure the spring is seated squarely on the rod and within the pocket to prevent lateral loading. Do not compress the spring beyond its rated travel-to-solid dimension during operation.