Associated Spring Raymond 106-732 Die Spring 8 in Green

Product Description

The ASSOCIATED SPRING RAYMOND 106-732 is a heavy-duty die spring designed for use in stamping dies, punch presses, and industrial tooling applications. It features a 1-1/2 inch hole diameter, a 3/4 inch rod diameter, and an 8 inch free length. The trapezoidal wire shape and chromium alloy steel construction deliver a maximum deflection load of 1,616 pounds with a maximum deflection of 2 inches and a spring rate of 905 pounds per inch. The green color coding identifies this as a heavy-load series spring, consistent with standard die spring classification systems. This part is installed by tool and die makers, press technicians, and industrial maintenance professionals.

This die spring is suited for heavy-load stamping, forming, and stripping applications in production tooling environments. It is appropriate for use in both new die builds and as a replacement component in existing die sets where the specified hole diameter, rod diameter, and free length match. The green load rating is typically applied where higher force output is required compared to lighter-duty blue or yellow rated springs in the same dimensional envelope.

Key Features

• 1-1/2 inch hole diameter and 3/4 inch rod diameter for precise die set fitment
• 8 inch free length provides substantial stroke capacity in deep die applications
• Maximum deflection load of 1,616 pounds supports heavy stamping and forming forces
• Spring rate of 905 pounds per inch delivers consistent, predictable force throughout compression
• Trapezoidal wire cross-section increases load capacity versus round wire in the same envelope
• Chromium alloy steel construction with ISO 9001:2008 and ISO/TS 16949:2009 quality certifications

Compatibility

Designed as an OEM-style replacement or new-build component for industrial die sets requiring a heavy-duty green-series die spring with a 1-1/2 inch hole diameter, 3/4 inch rod diameter, and 8 inch free length.

Installation Notes

Die spring replacement and installation is performed by qualified tool and die technicians or press maintenance personnel. Always de-energize and lock out the press before removing or installing die components. Ensure the rod and hole dimensions of the new spring match the existing die set exactly before installation. Do not compress the spring beyond its rated maximum deflection of 2 inches, as over-compression will cause premature fatigue failure.