Associated Spring Raymond 106-210 Die Spring Extra Heavy-duty

Product Description

The ASSOCIATED SPRING RAYMOND 106-210 is an extra heavy-duty die spring designed for use in stamping dies, press tooling, and precision industrial machinery. Built from chromium alloy steel with a trapezoidal wire cross-section, this spring delivers a spring rate of 115 pounds per inch and handles a maximum deflection load of 71.9 pounds. The 0.5 inch hole diameter accommodates a 9/32 inch rod, and the 2.5 inch free length suits a wide range of die set applications. Industrial maintenance technicians and tooling specialists are the primary installers of this component.

This die spring is suited for use in punch and die assemblies, injection mold tooling, and similar high-cycle press applications where consistent, repeatable force is required. The green color coding identifies the extra heavy-duty duty rating, following the ISO 10243 color standard used across the die spring industry. It fits applications calling for a 0.5 inch hole diameter and a maximum deflection of 0.63 inches under load.

Key Features

• Extra heavy-duty duty rating for high-load, high-cycle tooling applications
• Trapezoidal wire shape provides higher load capacity compared to round wire springs of the same envelope size
• Chromium alloy steel construction for strength and fatigue resistance
• Spring rate of 115 pounds per inch with a maximum deflection of 0.63 inches
• Green color coding for quick duty-rating identification in die sets
• Manufactured under ISO 9001:2008 and ISO/TS 16949:2009 certified quality systems

Compatibility

Designed as an OEM-style replacement or direct-fit die spring for punch and die tooling assemblies requiring a 0.5 inch hole diameter, 9/32 inch rod diameter, and 2.5 inch free length in an extra heavy-duty application.

Installation Notes

Die spring replacement and die set servicing should be performed by qualified tooling technicians or industrial maintenance personnel familiar with press tooling safety procedures. Always depressurize and lock out the press before removing or installing die springs. Inspect the rod diameter and hole diameter of the die set to confirm fitment before installation. Do not compress the spring beyond the rated maximum deflection of 0.63 inches, as overcompression accelerates fatigue failure.