Associated Spring Raymond 105-822 Die Spring Gold

Product Description

The ASSOCIATED SPRING RAYMOND 105-822 is a heavy-duty die spring engineered for use in stamping, punching, and forming tooling applications. It features a 2-inch hole diameter, a 1-inch rod diameter, and a free length of 5.5 inches. The trapezoidal wire shape delivers higher load capacity compared to round-wire springs of similar envelope dimensions. Constructed from chromium alloy steel, this spring handles a maximum deflection load of 1,650 pounds with a maximum deflection of 1.65 inches. The gold color coding identifies it as a heavy-load-class spring in standard die spring classification systems. It is installed by toolroom technicians, die makers, and precision manufacturing professionals.

This die spring is suited for use in metal stamping dies, progressive dies, and stripping applications in industrial press tooling. The 2-inch hole diameter and 1-inch rod diameter sizing fit standard die set configurations commonly found in medium-to-large press tooling. The gold heavy-load designation makes it appropriate for high-force applications where standard or light-load springs would bottom out or fatigue prematurely. It is typically installed in sets across a die plate to balance stripping or pressure pad forces evenly.

Key Features

• Heavy-load gold color class with 1,650-pound maximum deflection load
• Trapezoidal wire cross-section for higher load density in a compact envelope
• Chromium alloy steel construction for fatigue resistance under cyclic press loads
• 1.65-inch maximum deflection at rated load capacity
• Spring rate of 1,077 pounds per inch for predictable, linear force application
• Manufactured under ISO 9001:2008 and ISO/TS 16949:2009 certified quality systems

Compatibility

Designed as a standard-dimension replacement or new-build die spring for industrial press tooling requiring a 2-inch hole diameter, 1-inch rod diameter, and 5.5-inch free length in a heavy-load gold color class configuration.

Installation Notes

Die springs are installed by toolroom machinists or die maintenance technicians with the press fully de-energized and the ram blocked in the up position. Springs should be seated squarely on the rod and within the pocket bore to prevent side loading. Never compress a die spring beyond its published maximum deflection, as overtravel accelerates fatigue cracking. Inspect springs during scheduled die maintenance intervals and replace in matched sets when deflection under load or free length deviates from specification.