Associated Spring Raymond 105-724 Die Spring Gold

Product Description

The ASSOCIATED SPRING RAYMOND 105-724 is a heavy-duty die spring engineered for use in stamping dies, presses, and industrial tooling applications. It features a trapezoidal wire cross-section, which increases the active coil surface area and delivers a higher spring rate compared to round-wire designs. This unit carries a maximum deflection load of 1051.2 pounds and a spring rate of 584 pounds per inch, making it suitable for high-load cycling environments. Constructed from chromium alloy steel and finished in gold, it meets internationally recognized manufacturing quality standards. Installation is typically performed by toolmakers, die setters, or maintenance technicians working on metal-forming equipment.

This die spring is sized for tooling setups requiring a 1.5 inch hole diameter and a 0.75 inch rod diameter, with a 6 inch free length. The gold color coding follows the industry-standard ISO die spring classification system, indicating an extra-heavy load rating. It is commonly installed in progressive dies, compound dies, and forming tools found in metal fabrication shops and automated press lines. The 1.8 inch maximum deflection provides controlled, repeatable stroke travel across high-cycle production runs.

Key Features

• Trapezoidal wire cross-section for increased load capacity and longer service life compared to round-wire springs
• Maximum deflection load of 1051.2 pounds with a spring rate of 584 pounds per inch
• 1.8 inch maximum deflection for controlled, repeatable stroke travel
• Chromium alloy steel construction for high fatigue resistance in cycling applications
• Gold color code indicates extra-heavy load classification per ISO die spring standards
• Manufactured under ISO 9001:2008 and ISO/TS 16949:2009 certified quality systems with TUV Rheinland registration

Compatibility

Designed as a standard replacement die spring for tooling applications requiring a 1.5 inch hole diameter, 0.75 inch rod diameter, and 6 inch free length in the extra-heavy (gold) load category.

Installation Notes

Die springs are installed by qualified toolmakers or die maintenance technicians with the press or tooling station fully de-energized and the ram secured against movement. Always verify that the rod diameter and hole diameter clearances match the spring specifications before installation. Do not compress the spring beyond the rated maximum deflection, as over-compression causes permanent set and accelerated fatigue failure. Follow all applicable facility lockout/tagout procedures before performing any work inside a press or die assembly.