Associated Spring Raymond 105-607 Die Spring Gold Heavy-duty

Product Description

The ASSOCIATED SPRING RAYMOND 105-607 is a heavy-duty die spring engineered for demanding compression applications in industrial tooling and stamping dies. Built from chromium alloy steel with a trapezoidal wire profile, this spring delivers a maximum deflection load of 953.4 pounds and a spring rate of 1,816 pounds per inch. The gold color coding identifies its heavy-duty duty rating at a glance, following standard die spring classification conventions. With a free length of 1-3/4 inches and a maximum deflection of 0.53 inches, it is sized for precise fitment in die sets and tooling fixtures. Installation and maintenance are typically handled by tool and die makers or industrial maintenance technicians.

This die spring is suited for use in metal stamping dies, punch and die assemblies, injection molds, and similar precision tooling applications where consistent spring force and reliable cycle life are required. The 1-1/4 inch hole diameter and 5/8 inch rod diameter allow it to seat correctly on a guide rod or within a counterbored pocket in a die plate. It is appropriate for both light production and high-cycle industrial press operations where heavy-duty spring force is specified.

Key Features

• Heavy-duty duty rating with gold color coding for quick identification
• Trapezoidal wire cross-section for higher load capacity compared to round wire springs of similar envelope size
• Maximum deflection load of 953.4 pounds with a spring rate of 1,816 pounds per inch
• Chromium alloy steel construction for strength and fatigue resistance
• Manufactured under ISO 9001:2008 and ISO/TS 16949:2009 certified quality systems with TUV Rheinland registration
• ANAB accredited production standards

Compatibility

Designed as an OEM-style replacement or direct-fit die spring for industrial punch and die tooling requiring a 1-1/4 inch hole diameter, 5/8 inch rod diameter, and 1-3/4 inch free length in a heavy-duty gold-rated specification.

Installation Notes

Die springs should be installed by qualified tool and die technicians or industrial maintenance personnel. Always de-energize and lock out the press before servicing any die components. Ensure the guide rod diameter and pocket bore match the spring specifications to prevent buckling or misalignment under load. Do not compress the spring beyond the rated maximum deflection of 0.53 inches, as over-compression will shorten service life and can cause spring failure.