Associated Spring Raymond 105-212 Die Spring Heavy-duty

Product Description

The ASSOCIATED SPRING RAYMOND 105-212 is a heavy-duty die spring designed for use in stamping dies, punch press tooling, and industrial fixtures where consistent, reliable force is required. Built from chromium alloy steel with a trapezoidal wire cross-section, this spring delivers a spring rate of 74.00 pounds per inch and a maximum deflection load of 66.6 pounds at 0.9 inches of travel. The gold color coding identifies it as a heavy-duty grade per standard die spring classification. It is installed and serviced by tooling technicians, die setters, and maintenance personnel working with metal forming or press equipment.

This die spring is suited for use in stamping dies, molds, and mechanical assemblies requiring a compact, high-load spring element. With a 0.5 inch hole diameter and a 9/32 inch rod diameter, it mounts over a guide rod or inside a counter-bore. The 3 inch free length makes it appropriate for applications with moderate available pocket depth. It is commonly found in industrial manufacturing environments including automotive, fabrication, and general metalworking operations.

Key Features

• Heavy-duty duty rating with gold color coding per standard die spring classification
• Trapezoidal wire cross-section for higher load capacity relative to spring volume
• Chromium alloy steel construction for fatigue resistance in cyclic loading applications
• 74.00 pounds per inch spring rate for consistent, predictable force output
• Maximum deflection of 0.9 inches at 66.6 pounds load
• ISO 9001:2008 and ISO/TS 16949:2009 certified manufacturing

Compatibility

Designed as a standard-profile heavy-duty die spring for use in press tooling, stamping dies, and industrial fixtures that accept a 0.5 inch bore diameter and a 9/32 inch guide rod diameter with a 3 inch pocket depth.

Installation Notes

Die springs of this type are installed by qualified tooling technicians or die setters. All press equipment must be fully de-energized, locked out, and blocked before spring replacement or inspection. Ensure the guide rod diameter and counter-bore depth match the spring dimensions before installation. Do not compress the spring beyond its rated maximum deflection of 0.9 inches during setup or operation.