Associated Spring Raymond 105-206 Die Spring Heavy-duty

Product Description

The ASSOCIATED SPRING RAYMOND 105-206 is a heavy-duty die spring designed for use in stamping dies, punch press tooling, and industrial mold applications. It features a trapezoidal wire shape that delivers higher load capacity in a compact envelope compared to round-wire springs. With a 0.5-inch hole diameter, a 9/32-inch rod diameter, and a 1.5-inch free length, this spring handles a maximum deflection load of 69.8 pounds at 0.45 inches of travel. A spring rate of 148 pounds per inch makes it well suited for repeatable, high-cycle tooling where consistent force is critical. It is manufactured from chromium alloy steel and finished in gold to denote its heavy-duty duty rating.

This die spring is intended for integration into metal stamping dies, injection molds, and similar industrial tooling where controlled compression force is required. The gold color coding follows the standard ISO 10243 die spring classification system, identifying the heavy-duty load category. Typical users include tool-and-die makers, press technicians, and maintenance personnel working on stamping or molding equipment in manufacturing environments.

Key Features

• Heavy-duty duty rating with a spring rate of 148 pounds per inch for high-force tooling applications
• Trapezoidal wire cross-section provides greater load density compared to round-wire alternatives
• Maximum deflection load of 69.8 pounds at 0.45 inches of travel
• Chromium alloy steel construction for durability in high-cycle press environments
• Gold color coding indicates heavy-duty classification per standard die spring convention
• ISO 9001:2008 and ISO/TS 16949:2009 certified manufacturing; TUV Rheinland Registered

Compatibility

Designed as a replacement or new-installation die spring for stamping dies and industrial molds requiring a 0.5-inch hole diameter and 9/32-inch rod diameter with a 1.5-inch free length in the heavy-duty load category.

Installation Notes

Die springs should be installed by qualified tool-and-die technicians or press maintenance personnel. Before replacing a spring, de-energize and lock out the press or mold in accordance with applicable OSHA lockout/tagout procedures. Ensure the mating rod diameter and pocket diameter match the spring specifications to prevent buckling or premature failure. Do not compress the spring beyond its rated maximum deflection of 0.45 inches during installation or operation.