Ashcroft 95084 Pressure Gauge 0-15 Psi 2.5 in Dial Npt

Product Description

The ASHCROFT 95084 is an analog industrial pressure gauge with a 2.5-inch dial, designed to measure pressure from 0 to 15 psi. It features a 304/316 stainless steel case and a 316 stainless steel Bourdon tube, making it suitable for demanding service environments where corrosion resistance matters. The lower-mount NPT connection simplifies inline installation on pipes, manifolds, and pressure systems. With 1% of scale accuracy and a polycarbonate lens, this gauge delivers reliable readings in both wet and dry industrial settings. HVAC technicians, plumbers, and mechanical contractors install this gauge on low-pressure gas, water, and air systems.

This gauge is suited for residential and light commercial applications where low-pressure monitoring is required. Typical installations include boiler feed lines, compressed air systems, water supply systems, and low-pressure gas distribution panels. The lower-mount configuration allows direct connection to a bottom port, keeping the dial face upright and visible in standard panel or pipe installations. The gauge is not liquid-filled, so it is best deployed in environments free from severe vibration or pulsation.

Key Features

• 0 to 15 psi pressure range with vacuum range down to -30 inches Hg
• 2.5-inch analog dial for clear on-site readings
• 316 stainless steel Bourdon tube for corrosion resistance
• 304/316 stainless steel case construction
• 1% of scale accuracy
• Polycarbonate lens
• Certified to CRN, IP54, IP65/NEMA 4, PED, and RoHS standards

Compatibility

Designed as an OEM-style replacement or direct-install industrial pressure gauge for low-pressure piping systems using 0.25-inch NPT lower-mount connections in HVAC, plumbing, and mechanical applications.

Installation Notes

Installation should be performed by a licensed plumber, HVAC technician, or qualified mechanical contractor. Isolate and depressurize the system fully before removing or installing any pressure gauge. Apply thread sealant or PTFE tape to the NPT threads per applicable IPC or IFGC guidelines. Avoid over-tightening the NPT connection, as the stainless steel case and fittings can be damaged by excessive torque.