Asc Engineered Solutions 8700148052 Galvanized Nipple 1/4x8 in

Product Description

The ASC Engineered Solutions 8700148052 is a welded steel pipe nipple finished with a hot-dipped galvanized coating for corrosion resistance. Sized at 1/4 inch nominal diameter by 8 inches in length, this Schedule 40 nipple meets ASTM A53 standards for structural and pressure-rated pipe applications. Lead content on wetted surfaces is controlled to no more than 0.25% weighted average, making it suitable for potable water systems where low-lead compliance is required. Plumbers and pipefitters install this nipple as a short threaded connector between fittings, valves, and pipe runs in both residential and commercial installations.

This galvanized nipple is used in water supply, irrigation, gas distribution, and general-purpose plumbing systems where corrosion resistance and Schedule 40 wall thickness are required. The hot-dipped galvanized coating provides a durable zinc layer suited for exposed or damp environments. It is a standard close-coupled connector in applications where a short threaded section is needed between two threaded fittings or components.

Key Features

• Hot-dipped galvanized finish for corrosion resistance in wet or exposed environments
• Meets ASTM A53 standards for welded steel pipe
• Schedule 40 wall thickness for standard pressure-rated applications
• Low-lead compliant — wetted surface lead content does not exceed 0.25% weighted average
• NPT threads on both ends for direct connection to standard threaded fittings

Compatibility

Designed as a standard Schedule 40 galvanized threaded nipple compatible with 1/4 inch NPT fittings, valves, and pipe couplings used in residential and commercial plumbing and gas piping systems.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with the International Plumbing Code or applicable local codes. Shut off the water or gas supply and depressurize the line before removing or installing any threaded pipe components. Apply an appropriate thread sealant or PTFE tape to the male threads before assembly to ensure a leak-free connection. Do not over-tighten, as this can crack fittings or distort threads.

Technical Specifications

• Nominal Diameter: 1/4 inch
• Length: 8 inches
• Material: Welded Steel
• Finish: Hot-Dipped Galvanized
• Schedule: 40
• Standard: ASTM A53
• Max Lead Content (Wetted Surface): 0.25% weighted average
• Weight: 0.312 pounds

Standard Information

• Brand: ASC Engineered Solutions
• Manufacturer Part Number: 8700148052