Asc 810007419 Black Malleable Iron 90 Deg Reducing Elbow 1/2x3/8

Product Description

The ASC Engineered Solutions 810007419 is a black-coated malleable iron 90-degree reducing elbow designed for threaded pipe installations in plumbing, gas distribution, and mechanical piping systems. This fitting transitions from a 1/2-inch inlet to a 3/8-inch outlet while making a right-angle turn, making it a practical solution for tight routing situations. Weighing 0.19 pounds, it is compact and suited for both new construction and retrofit work. Licensed plumbers, pipefitters, and mechanical contractors are the primary installers for this type of fitting in low-pressure gas and fluid piping assemblies.

This reducing elbow is used in residential and light commercial applications where a directional change and a size reduction must happen at the same connection point. Typical install scenarios include gas supply lines, compressed air distribution, and water piping where a 90-degree turn from a 1/2-inch pipe to a 3/8-inch pipe is required. The black coating makes it appropriate for gas piping applications where black iron fittings are the standard.

Key Features

• Malleable iron construction provides strength and resistance to cracking under mechanical stress
• 90-degree angle allows directional changes in confined spaces
• Reducing geometry transitions from 1/2 inch to 3/8 inch in a single fitting
• Black coating is compatible with gas piping applications per standard trade practice
• Lightweight at 0.19 pounds, minimizing load on threaded pipe connections

Compatibility

Designed as an OEM-style replacement or standard-stock fitting for threaded malleable iron piping systems using 1/2-inch to 3/8-inch NPT connections.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes and the International Fuel Gas Code (IFGC) or International Plumbing Code (IPC) as appropriate. Shut off gas or fluid supply and depressurize the line completely before removing or installing any threaded fitting. Apply an approved thread sealant or PTFE tape rated for the service medium before making up the joint. Do not over-tighten malleable iron fittings, as the material can crack under excessive torque.

Technical Specifications

• Fitting Material: Malleable Iron
• Coating: Black
• Elbow Angle: 90 degrees
• Fitting Size: 1/2 inch x 3/8 inch
• Weight: 0.19 pounds
• Origin: Import

Standard Information

• Brand: ASC Engineered Solutions
• Manufacturer Part Number: 810007419