Apollo Valves 77CLF20701A Ball Valve 1-1/2 in Solder Bronze

Product Description

The APOLLO VALVES 77CLF20701A is a 2-piece, full-port ball valve designed for shut-off service in potable water and general fluid systems. Part of the 77CLF-A Series, it is built with a bronze body, a chrome-plated brass ball, and a nickel-plated brass stem with RPTFE seats and seals. The valve is rated at 600 psi CWP and can handle temperatures up to 450 degrees F. A standard lever handle provides manual quarter-turn operation. Solder end connections and a full 1-1/2 inch orifice ensure minimal flow restriction. This is a domestically produced, lead-free valve suited for licensed plumbing installations.

The 77CLF20701A is used in residential and light commercial plumbing systems where a reliable lead-free shut-off is required. Its solder end style makes it a direct fit for copper pipe installations. The 1-1/2 inch nominal size is common in main water service lines, branch headers, and hydronic heating supply and return circuits. The lever actuator allows quick visual confirmation of open or closed position, which is standard practice in service and maintenance applications. Licensed plumbers and pipefitters are the primary installers for this valve type.

Key Features

• 600 psi CWP pressure rating for high-pressure potable water and general service applications
• Full port design with 1-1/2 inch orifice minimizes pressure drop across the valve
• Bronze body construction provides corrosion resistance in water systems
• Chrome-plated brass ball and nickel-plated brass stem for durable cycling performance
• RPTFE seats and seals deliver tight shutoff and extended service life
• Lead-free construction meets applicable potable water standards
• Domestically manufactured with a 5-year warranty

Compatibility

Designed as an OEM-style replacement or new-installation ball valve for 1-1/2 inch copper solder-end piping systems in residential and commercial plumbing applications where lead-free components are required.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and fully depressurize and drain the line before soldering or removing any existing valve. Use standard copper solder fittings and techniques, and allow the valve body to cool fully before cycling the ball to avoid seal damage. Verify system pressure does not exceed the 600 psi CWP rating after reinstating service.