Apollo Valves 72-107-01 2-piece Ball Valve 1-1/2 in Fnpt

Product Description

The APOLLO VALVES 72-107-01 is a 2-piece, full-port ball valve in the 72-100 Series, designed for shut-off service in demanding piping systems. Built with a carbon steel body and ball, it carries a cold working pressure (CWP) rating of 3000 psig, making it suitable for high-pressure applications. The valve features a lever-operated actuator, an FNPT end style for threaded installation, and RPTFE/MPTFE softgoods with a carbon steel stem and RPTFE seat trim. An adjustable packing gland is included. At 5.23 inches inlet to outlet length and 3.56 inches top to inlet center, it fits standard 1-1/2 inch nominal piping configurations. This is a domestically manufactured valve intended for installation by licensed plumbers and pipefitters.

The 72-107-01 is rated for water service and is suited for residential and light commercial plumbing, hydronic heating, and industrial piping systems where a reliable threaded shut-off is required. The full-port design minimizes flow restriction, which is critical in systems where pressure drop must be kept low. FNPT threaded connections allow direct installation into standard pipe runs without additional fittings. This valve is a practical choice for mechanical rooms, boiler piping, and utility service lines.

Key Features

• 3000 psig CWP pressure rating for high-pressure service
• Full-port design minimizes flow restriction and pressure drop
• Carbon steel body, ball, and stem for strength and durability
• RPTFE seat and MPTFE softgoods resist chemical attack and reduce wear
• Adjustable packing gland included for field maintenance
• FNPT end style for standard threaded pipe connections
• Domestically manufactured with a 5-year warranty

Compatibility

Designed as an OEM-style threaded ball valve replacement for 1-1/2 inch nominal piping systems requiring a 3000 psig CWP-rated, full-port carbon steel shut-off valve with FNPT connections.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes and the International Plumbing Code (IPC). Depressurize and drain the system fully before removing or installing any valve. Apply thread sealant or PTFE tape to male threads before making up connections, and tighten to the fitting manufacturer's specification. Do not exceed the rated CWP for the valve or the piping system.