Apollo Valves 670750633560 Check Valve 1-1/2 in Ips Ss

Product Description

The APOLLO VALVES 670750633560 is a 1-1/2 inch IPS in-line check valve built to the 62-100 Series specification. It features a stainless steel body and an RPTFE ball check mechanism that provides reliable protection against reverse flow. The patented ball-cone design allows positive shutoff in demanding service conditions. This valve is intended for installation by licensed pipefitters, plumbers, or industrial maintenance technicians working in process or utility piping systems. It carries a cold working pressure rating of 400 psig and a steam working pressure rating of 125 psig, making it appropriate for moderate to high-pressure installations.

The 62-100 Series valve is specifically suited for corrosive service environments where standard brass or cast iron valves would degrade. Typical applications include chemical processing plants, pulp and paper facilities, and other process industries that require stainless steel wetted components. The IPS end connections make it compatible with standard threaded pipe installations in both industrial and commercial settings. The operating temperature range of -20 to 100 degrees F covers a wide variety of process fluid conditions.

Key Features

• Stainless steel body rated for corrosive service in chemical and process industry applications
• RPTFE ball check provides reliable, low-friction reverse-flow shutoff
• Cold working pressure rated at 400 psig with steam working pressure at 125 psig
• IPS threaded end connections for standard pipe installation
• Operating temperature range of -20 to 100 degrees F
• Domestically manufactured to 62-100 Series specification

Compatibility

Designed as a 62-100 Series in-line check valve for 1-1/2 inch IPS threaded piping systems in corrosive or process service environments, including chemical processing, pulp and paper, and similar industrial applications.

Installation Notes

Installation should be performed by a licensed pipefitter or plumber in accordance with applicable local and national codes, including relevant sections of the IPC. Depressurize and isolate the piping system fully before removing any existing valve or fitting. Verify flow direction against the valve body marking before threading into line. Do not exceed the published pressure and temperature ratings for the service fluid in use.