Apollo Powerpress 7482101 1 in Gas Press Adapter

Product Description

The APOLLO POWERPRESS 7482101 is a 1-inch carbon steel press-to-male NPT adapter designed for fuel gas distribution systems. It transitions a press-style connection on one end to a male NPT-threaded connection on the other, allowing installers to tie press-fit carbon steel piping into threaded components without additional fittings. The adapter carries the 404G designation, indicating compliance with press fitting standards for gas service. A zinc-nickel coating provides corrosion resistance in typical indoor and underground-adjacent piping environments. Licensed plumbers and gas fitters install this fitting as part of carbon steel gas piping assemblies in residential and light commercial applications.

This adapter is rated for use with natural gas, LP gas, and other fuel gas media covered under NFPA 54 and NFPA 58. It is compatible with Schedule 10 through Schedule 40 carbon steel pipe in 1-inch nominal size. Typical installations include main gas line branches, appliance drops, and service transitions where a press-to-thread connection is required. The press end accepts standard press tooling used with 404G-series carbon steel fittings.

Key Features

• Press x Male NPT end configuration enables direct adaptation from press-fit pipe to threaded components
• Zinc-nickel coating provides corrosion resistance for fuel gas service environments
• Compatible with Schedule 10 through Schedule 40 carbon steel pipe
• Rated for natural gas, LP gas, and fuel gas applications per NFPA 54 and NFPA 58
• 404G press fitting designation confirms suitability for gas piping systems
• Compact profile at 1.79 inches length supports installation in tight spaces

Compatibility

Designed for use with 1-inch Schedule 10 through Schedule 40 carbon steel pipe in natural gas, LP gas, and fuel gas systems covered under NFPA 54 and NFPA 58.

Installation Notes

Installation must be performed by a licensed plumber or gas fitter in accordance with local codes and NFPA 54 or NFPA 58 as applicable. Shut off and verify zero gas pressure at the line before making any connections. The press end requires a compatible 404G press tool — do not attempt to seat the press connection with improvised tooling. Inspect the pipe end for squareness and clean it before insertion to ensure full engagement and a leak-free crimp.