Apex Tools Group Llc T9600435 Screw Pin Anchor Shackle

Product Description

The APEX TOOLS GROUP LLC T9600435 is a 1/4-inch zinc-plated screw pin anchor shackle rated for a working load limit (WLL) of 400 pounds with a 5-to-1 design factor. This shackle is designed for lifting, rigging, and load-securing applications where a reliable, removable connection point is required. The screw pin closure allows for quick attachment and detachment without tools, while the zinc plating provides corrosion resistance in moderate environments. Each unit is UPC tagged for inventory and compliance tracking. This package contains 10 shackles, making it suitable for contractors and service crews stocking rigging hardware.

Screw pin anchor shackles of this size are commonly used in light-to-medium rigging setups on construction sites, marine environments, and utility work. The 1/4-inch body size and 400-pound WLL make this shackle appropriate for securing loads, connecting chains or wire rope, and general rigging tasks in both residential and light commercial applications. Licensed riggers and trade professionals installing this hardware should verify that the WLL is not exceeded and that the shackle is rated for the specific application requirements.

Key Features

• Working load limit (WLL) of 400 pounds for light-to-medium rigging applications
• 5-to-1 design factor provides a safety margin above the rated WLL
• Zinc-plated finish offers corrosion resistance in moderate-exposure environments
• Screw pin closure allows tool-free installation and removal
• UPC tagged for easy inventory management and compliance
• Package of 10 units per order for crew-level stocking

Compatibility

Designed as a standard 1/4-inch screw pin anchor shackle suitable for use with 1/4-inch chain, wire rope, or synthetic slings rated at or below the 400-pound WLL.

Installation Notes

Screw pin shackles should be installed by a qualified rigger familiar with applicable ASME B30.26 rigging hardware standards. Before use, confirm the pin is fully threaded and secured to prevent rotation under load. Never side-load a shackle beyond its rated capacity, and inspect each shackle for deformation, cracks, or corrosion before every use. Remove from service immediately if any damage or wear is detected.