Anvil 0332826007 Black Pipe Nipple 1-1/4 in Sch 160

Product Description

The ANVIL 0332826007 is a Schedule 160 black steel pipe nipple sized at 1-1/4 inches in diameter and 8 inches in length. It is a short, threaded pipe section used to connect fittings, valves, and equipment in high-pressure piping systems. The heavy-wall Schedule 160 construction provides significantly greater wall thickness than standard Schedule 40 or 80 nipples, making it suitable for demanding service conditions. Licensed plumbers and pipefitters typically install this nipple in industrial, commercial, and mechanical systems where elevated pressure ratings are required. The black finish is standard for non-potable and gas distribution applications.

This nipple fits into piping systems that require a 1-1/4-inch nominal pipe size connection. It is commonly used in gas distribution lines, steam systems, hydraulic and compressed-air distribution, and industrial process piping. The threaded ends allow direct makeup with standard NPT fittings and valves. It is well suited for both new construction rough-in and replacement of damaged or corroded nipple sections in existing systems.

Key Features

• Schedule 160 heavy-wall construction for high-pressure service
• 1-1/4 inch nominal diameter with NPT threaded ends
• 8 inch face-to-face length for precise spacing in assemblies
• Black finish appropriate for gas and non-potable fluid service
• Compact single-piece unit — package quantity of 1

Compatibility

Designed as a standard NPT-threaded replacement nipple for 1-1/4 inch Schedule 160 piping systems in commercial, industrial, and mechanical applications.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable codes, including the International Plumbing Code or International Fuel Gas Code as relevant to the service type. Shut off and depressurize the line completely before removing any existing nipple or fitting. Apply an approved thread sealant or PTFE tape to the male threads before makeup. Do not over-tighten threaded connections, as Schedule 160 fittings used with mismatched-schedule components can develop stress cracks at the threads.