Anvil 0330504705 Black Pipe Nipple 1/8 in X 72 in Sch 80

Product Description

The ANVIL 0330504705 is a Schedule 80 seamless black pipe nipple sized at 1/8 inch nominal diameter and 72 inches in length. This nipple is manufactured to ASME B1.20.1 and ASTM standards, delivering the wall thickness and thread integrity required for demanding piping systems. The black finish coating is standard for gas and steam service applications. Licensed plumbers, pipefitters, and HVAC technicians install this type of close-tolerance nipple where a pre-threaded, full-length run of small-diameter pipe is needed without field cutting or threading on the job.

This nipple is suited for residential and light commercial piping assemblies involving natural gas, steam, or low-pressure air. Its 72-inch length makes it a practical choice for long straight runs between fittings in tight mechanical spaces or utility rooms. The Schedule 80 wall thickness provides additional strength over Schedule 40, making it appropriate for higher-pressure or higher-temperature service conditions where code or the system design calls for the heavier wall. Both ends carry NPT threads conforming to ASME B1.20.1.

Key Features

• Schedule 80 seamless construction for increased wall thickness and pressure rating
• 72-inch length provides an extended straight run without field threading
• 1/8 inch nominal diameter with NPT threads per ASME B1.20.1
• Black finish coating suitable for gas and steam piping service
• Meets ASTM material standards for pipe nipple fabrication

Compatibility

Designed as an OEM-style replacement or new-installation component for Schedule 80 small-diameter black iron piping systems using standard NPT threaded fittings.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with the applicable edition of the International Fuel Gas Code (IFGC) or International Plumbing Code (IPC) for the jurisdiction. Shut off and verify zero pressure at the gas or fluid supply before threading or unthreading any connection. Apply listed pipe thread sealant or PTFE tape rated for the service medium to all NPT threads before assembly. Do not use black iron pipe nipples on systems carrying oxygen or potable water unless confirmed appropriate for the service by the system engineer.