Ansell NEC-288-XXL Neoprene Gloves 2XL 6.3 Mil 50-pack

Product Description

The ANSELL NEC-288-XXL is a powder-free neoprene disposable glove from the Microflex Neopro series, sized for 2X-Large hands and manufactured to a nominal thickness of 6.3 mil at the palm. The glove features a green, ambidextrous construction with a grain-textured finger surface for grip and an extended rolled cuff measuring 11.4 inches in length. It carries FDA 510(k) clearance and meets ASTM D6977 testing requirements, making it appropriate for both medical and chemical-resistant applications. Licensed HVAC technicians, plumbers, electricians, and pool service professionals reach for this glove when handling refrigerants, chemicals, or biological materials where barrier protection and dexterity are both required.

The NEC-288-XXL is suited to residential and light commercial service environments where a durable, single-use chemical-resistant glove is called for. Typical scenarios include handling pool chemicals, refrigerant lines, solvent-based cleaners, and drain or waste work. The grain texture on the fingers improves grip on tools and fittings in wet or oily conditions. Gloves ship 50 per package. The static dissipative property also makes these appropriate in environments where electrostatic discharge is a concern, such as work near sensitive controls or circuit boards.

Key Features

• 6.3 mil nominal thickness with palm thickness rated at 6.5 mil for added puncture resistance
• Powder-free neoprene construction minimizes contamination risk and skin irritation
• Extended 11.4-inch rolled cuff provides additional forearm coverage during immersion tasks
• Grain texture on fingers maintains grip on wet, oily, or chemical-coated surfaces
• Static dissipative material rated for use near sensitive electrical components
• FDA approved and meets ASTM D6977, EN 420, and NFPA 1999:2013 standards

Compatibility

Designed for general chemical-resistant and medical-grade disposable glove applications where neoprene barrier protection is required. Meets US QSR/FDA 510(k), FDA 21 CFR 177.2600, ASTM D6977, EN 420:2003+A1:2009, NFPA 1999:2013, and ISO 13485 requirements.

Installation Notes

Inspect each glove for tears or pinholes before use, particularly when working with corrosive chemicals or biological material. Power down electrical systems and shut off refrigerant or gas supply before donning gloves for service work. These are single-use disposable gloves and should not be reused after exposure to hazardous substances. Dispose of used gloves in accordance with applicable local, state, and federal regulations for the materials contacted.