Anderson Metals 754075-0604 Brass Flare Swivel Reducer

Product Description

The ANDERSON METALS 754075-0604 is a lead-free brass flared tube swivel connector designed for reducing applications in refrigeration, HVAC, and plumbing tubing systems. It connects a 3/8 inch OD tube to a 1/4 inch OD tube using standard 45-degree flare fittings on both ends. The swivel design allows the fitting to rotate during installation, reducing torque stress on soft copper tubing and making it easier to achieve a leak-free seat without twisting the line. Constructed from lead-free brass, this connector meets current potable-water and refrigerant-line material standards. Licensed plumbers, HVAC technicians, and refrigeration mechanics install this type of fitting in tubing runs where a size transition is required.

This connector is suited for residential and light commercial applications where 45-degree flare fittings are specified, including copper refrigerant lines, fuel gas tubing, and potable-water supply connections. The reducing configuration handles transitions from 3/8 inch OD to 1/4 inch OD tube, a common size step-down found in split-system refrigerant circuits and appliance connections. Both ends accept standard 45-degree flare seats, so no solder or thread sealant is required at the flare joint.

Key Features

• Lead-free brass construction meets current material requirements for potable-water and refrigerant-line applications
• Swivel body rotates during tightening to prevent torque transfer and tube twist
• 45-degree flare x flare ends on both sides for a metal-to-metal seal without sealant
• Reducing configuration steps down from 3/8 inch OD to 1/4 inch OD tube
• Rated to 1000 psi maximum working pressure (dynamic and static)
• Single-piece fitting with no loose parts; sold individually

Compatibility

Designed as an OEM-style replacement or new-installation fitting for copper tubing systems using standard 45-degree flare connections with 3/8 inch and 1/4 inch OD tube sizes.

Installation Notes

Installation should be performed by a licensed plumber, HVAC technician, or refrigeration mechanic in accordance with applicable local codes and IFGC or IPC requirements where relevant. Shut off the refrigerant, gas, or water supply and depressurize the line before cutting or disconnecting any tubing. Use a calibrated flaring tool to produce a uniform 45-degree flare seat on each tube end before assembling the fitting; an improperly formed flare is the leading cause of leaks at this joint type. Use two wrenches when tightening to prevent tube rotation, and pressure-test the completed assembly before returning the system to service.