Anderson Metals 754048-0602 Brass Flare Connector 3/8 in

Product Description

The ANDERSON METALS 754048-0602 is a lead-free brass flared tube connector designed for use in pressurized fluid and gas line assemblies. It features a 45-degree flare on the tube end and a male NPT threaded end, creating a reliable Flare x MNPT transition fitting. The tube outside diameter is 3/8 inches, and the male thread is 1/8 inch NPT. Rated for up to 1000 psi working pressure in both static and dynamic applications, this connector is suited for demanding service environments where leak-free performance is required. Lead-free brass construction meets regulatory standards for potable water and general plumbing installations.

This connector is used in residential and light commercial plumbing, HVAC refrigerant piping, gas line distribution, and fluid transfer systems where a flared copper or compatible tube must transition to a threaded port. The 45-degree flare configuration is standard for many compression and gas line applications. Plumbers, HVAC technicians, and pipefitters install this fitting where a secure, pressure-rated mechanical connection is needed between soft tubing and a threaded fitting or valve body.

Key Features

• Lead-free brass construction suitable for potable water and regulated plumbing systems
• 45-degree flare end accepts standard 3/8 inch OD flared tubing
• 1/8 inch male NPT thread for direct connection to threaded ports and valves
• Rated to 1000 psi working pressure in both static and dynamic service
• Flare x MNPT end configuration for tube-to-pipe thread transitions
• Compact single-piece fitting with no additional components required

Compatibility

Designed as an OEM-style replacement or new-installation fitting for systems using 3/8 inch OD flared tubing with a 1/8 inch NPT threaded port connection, following standard NPT thread specifications.

Installation Notes

Installation should be performed by a licensed plumber, pipefitter, or qualified HVAC technician in accordance with applicable local codes and the International Plumbing Code or IFGC where gas service applies. Shut off system pressure and depressurize the line completely before removing or installing any fitting. Ensure the tube end is properly flared to the correct 45-degree angle before seating the flare nut to avoid leaks. Do not overtighten; follow standard torque practices for the fitting size and material.