Anderson Metals 730060-05 Compression Tube Sleeve Brass

Product Description

The ANDERSON METALS 730060-05 is a compression tube sleeve fitting manufactured from lead free brass. It serves as the ferrule component in a compression-style tube connection, creating a leak-resistant seal when the fitting body nut is tightened against the tubing. Rated to a maximum working pressure of 3000 psi, this sleeve is suited for plumbing, refrigeration, and fluid-control line assemblies where a secure, reusable mechanical connection is required. Licensed plumbers and HVAC technicians install this type of fitting in both residential and light commercial applications. The package contains 5 sleeves per unit.

Compression tube sleeves are used wherever tubing must be joined or terminated without soldering or flaring. Common install scenarios include potable water supply lines, instrumentation tubing, pneumatic control circuits, and refrigerant piping where local codes permit compression fittings. The lead free brass construction makes this sleeve compliant with potable water service requirements under current plumbing codes. This fitting is appropriate for use with compatible copper or brass tubing in systems operating within the rated pressure range.

Key Features

• Lead free brass construction meets potable water compliance requirements
• Rated to 3000 psi maximum working pressure for high-demand service lines
• Sleeve-style end connection for standard compression fitting assemblies
• Sold in a 5-piece package to support multi-point installations or stock replenishment
• Compact form factor suits tight-clearance installations in panels and equipment cabinets

Compatibility

Designed as an OEM-style replacement or service sleeve for standard compression tube fittings used in plumbing, HVAC, and fluid-control piping assemblies.

Installation Notes

Installation is performed by licensed plumbers or qualified HVAC technicians. Shut off and depressurize the supply line before disassembling any compression fitting. Slide the sleeve onto the tubing before threading the nut onto the fitting body, and ensure the tubing is cut square and fully seated prior to tightening. Do not over-tighten the compression nut, as this can deform the sleeve and cause leaks; follow the fitting manufacturer's recommended turn count from finger-tight.