Amg Systems AMG210M-1GAT-1SM1A-P30 Media Converter

Product Description

The AMG SYSTEMS AMG210M-1GAT-1SM1A-P30 is an enterprise-grade media converter designed to bridge copper and fiber network segments at gigabit speeds. It supports a 1-gigabit data rate and integrates a 1-millimeter fiber interface, making it suited for short-reach fiber runs in commercial and industrial network infrastructure. The unit supplies up to 30 watts of Power over Ethernet (PoE), allowing it to power downstream devices such as IP cameras, access points, and VoIP phones directly through the network cable. This is the A-Side unit, intended for use as one half of a paired media conversion link. Network technicians and low-voltage installers are the primary trades working with this equipment.

This media converter is used in enterprise, commercial building, and industrial network installations where copper-to-fiber conversion is required at the network edge or between wiring closets. It fits applications where PoE-capable endpoints must be served across a fiber backbone without deploying a full managed switch. The A-Side designation indicates this unit pairs with a corresponding B-Side converter to complete the fiber link. Typical deployments include security systems, building automation networks, and structured cabling installations requiring extended reach beyond copper distance limits.

Key Features

• 1-gigabit data rate supports full-speed network throughput over the fiber segment
• 1-millimeter fiber interface suited for short-reach multimode fiber runs
• 30-watt PoE output powers downstream devices without a separate power injector
• A-Side unit designed for paired deployment with a compatible B-Side converter
• Enterprise media converter class for commercial and industrial network use

Compatibility

Designed as an enterprise media converter for gigabit copper-to-fiber network applications requiring 30W PoE capability. Intended for use as the A-Side unit in a paired media conversion configuration.

Installation Notes

Installation should be performed by a qualified low-voltage network technician familiar with structured cabling standards and PoE device deployment. Power down or disconnect PoE-capable downstream devices before connecting or disconnecting the converter to avoid potential damage. Verify that the fiber patch cable type and connector style are compatible with the 1-millimeter interface before installation. Follow applicable codes and manufacturer pairing requirements when deploying the A-Side unit alongside its corresponding B-Side converter.