American Standard ASD-JBS-8D20AC-WH 20W 8in Led Panel

Product Description

The AMERICAN STANDARD ASD-JBS-8D20AC-WH is a square recessed LED mini panel designed for flush ceiling installation in residential and light-commercial applications. Running at 20 watts and 120 volts, this fixture delivers between 1,550 and 1,743 lumens depending on the selected color temperature. It is CCT selectable across five settings — 2700K, 3000K, 3500K, 4000K, and 5000K — switchable without tools. A CRI rating above 90 ensures accurate color rendering. The 110-degree beam angle provides broad, even coverage with no dark spots. Dimming is supported from 10 percent to 100 percent when paired with a compatible modern LED dimmer. The unit is IC rated and requires no separate housing or can.

This fixture is suited for residential ceiling installations in living rooms, bedrooms, hallways, and corridors. Its wet-location rating also makes it appropriate for bathrooms, laundry rooms, or other humidity-prone spaces. The panel mounts directly to a J-box and requires only 2 inches of ceiling depth, making it a practical choice in shallow ceiling assemblies. It is available in White finish as indicated by this SKU. Electricians and skilled DIYers install this unit during new construction and remodel projects where a low-profile, energy-efficient recessed fixture is specified.

Key Features

• CCT selectable: 2700K, 3000K, 3500K, 4000K, and 5000K via onboard switch
• Dimmable from 10 percent to 100 percent with compatible LED dimmers
• IC rated — no can or separate housing required
• Wet-location listed for use in humid or damp environments
• 110-degree beam angle for broad, even floor-level coverage
• Rated 54,000-hour LED lifespan for long-term service life
• Spring-loaded clips for tool-free ceiling retention after cutout

Compatibility

Designed for direct J-box mounting in standard residential and light-commercial ceiling assemblies requiring a shallow recessed LED panel with a 2-inch depth clearance. No separate housing or recessed can is required.

Installation Notes

Installation is typically performed by a licensed electrician in accordance with NEC requirements for low-voltage luminaire wiring. Before beginning work, shut off the branch circuit breaker supplying the installation point and verify the circuit is de-energized with a non-contact voltage tester. Cut the ceiling opening using the supplied template, connect the J-box leads to the existing switch leg wiring, and seat the fixture using the spring-loaded retention clips. IC-rated construction allows direct insulation contact above the ceiling plane.